How to Jailbreak iOS 9.3.3 With Pangu

Pangu announced the release of a new jailbreak tool for iOS 9.2-9.3.3. The tool was only available in Chinese language help when releasing but now you are access to English version as well. So now it is time Jailbreak iOS 9.3.3 that was excitedly awaited to hear. In this tutorial, we’ll show you how to jailbreak iOS 9.2 to iOS 9.3.3 with the new Pangu jailbreak tool. And it is recommended update iOS 9.3.3 before turn to jailbreak, if you still not and have no specific reason to stick to an older firmware.

Jailbreak iOS 9.3.3

Because this is a Windows-only jailbreak when it announced first, you needed a PC, or a Mac with either Bootcamp or a virtual machine running Windows to jailbreak your device. But now you can jailbreak iOS 9.3.3 with help of a Windows PC, Mac or else with Linux support.

Another thing we need to note before getting started is that this jailbreak only supports 64-bit iOS devices, so the iPhone 5  older models are officially out of support. It’s unknown if this will change in the future, but still we found no change.

The list of supported devices currently are:

  • iPhone 5s
  • iPhone 6, iPhone 6 Plus
  • iPhone 6s, iPhone 6s Plus
  • iPhone SE
  • iPod touch 6G
  • iPad mini 2, iPad mini 3, iPad mini 4, iPad Air, iPad Air 2,
  • iPad Pro

Those of you who have jailbroken your iOS 9.2-9.3.3 devices with the new Pangu jailbreak tool should know by now that it’s a semi-untethered jailbreak. This means you have to re-run the jailbreak tool every time you reboot your device, but it’s easier than one might think. But you may get confused if you had your previous time with a stable jailbreak like iOS 9-9.0.2.

In this piece, we’ll talk about how to reboot your semi-untethered jailbroken iOS 9.2-9.3.3 device properly so that Cydia works as expected after your device turns back on.

What is a Semi-untethered Jailbreak?

A semi-untethered jailbreak is a hybrid between an untethered jailbreak and a tethered jailbreak.

Jailbreak iOS 9.3.3 with Pangu-Jailbreak Guide

If you have one of the supported devices, have access to a Windows, Mac or Linux machine, and want to jailbreak your iOS device, then you’re going to want to follow these steps:

1) Update your iOS device to iOS 9.3.3. This is the latest jailbreakable firmware and this means you’re going to want to install it because it has all of the latest bug fixes and security features

2) Make sure to turn off Find My iPhone and to disable your passcode on the device you’re jailbreaking, then plug it into your computer with the Lightning cable

3) Make sure the computer has iTunes installed on it before proceeding; you can download it here. If you haven’t already, be sure to trust your computer from your iOS device and trust your iOS device from iTunes

4) Download the PP/Pangu jailbreak tool installer for Windows, Click below

Download Pangu

5) Right-click on it and click Run As Administrator

6) Windows will ask you to trust the publisher. Click on the Yes button

7) Windows may also ask you to trust the app for Windows Firewall, so go ahead and Trust the connections

Pangu Download

8) When the tool launches, click on the only button in the UI and it’ll start downloading and installing the actual jailbreak tool

9) When finished, you’ll notice a new app with the PP icon on it

10) Right-click it and choose Run As Administrator once again

11) Next, click on the Yes button when asked if the app can run on your PC

12) The jailbreak tool interface will open and attempt to discover any connected devices, so wait for a few minutes

13) Once your device is discovered, click on the green button to continue

Pangu download

14) The green button will begin to display a loading circle to indicate it’s working

15) After a few minutes, you will be asked for your Apple ID. Proceed at your own risk and log in, or do what we did and create a phony Apple ID to log in with. When your information is entered, click on the green button to log in (We her recommend you to have a secondary Apple ID)

16) Now wait a few minutes longer and a Pangu/PP app appears on your iOS device’s Home screen

17) You now want to go to your Settings app (not the Pangu/PP app), and navigate to General > Device Management

Pangu Download

18) Tap on the profile that appears here, and then tap on the blue Trust button that appears with your email address.

19) In the pop-up prompt, tap on the red Trust button, and then go to your Home screen after you’ve successfully trusted the profile.

20) Next, you want to launch the Pangu/PP app that was on your Home screen. You will be prompted to allow push notifications. Make sure to allow them by tapping on the OK button

21) Next, tap on the circle in the app, and then it will turn into a line of text

22) Now, lock your device by pressing your sleep button once. After a few moments, you should see a notification appear

23) After a few seconds, you should also see a prompt for your device’s storage getting full. This is normal, and indicates Cydia is being installed. You can unlock your device and re-launch the Pangu/PP app and you should see it trying to install Cydia.

24) Your device should automatically reboot itself a few moments after, and when it turns back on, you should see Cydia on your Home screen

Cydia 9.3.3

25) Launch Cydia, and it will re-load data and prepare the filesystem as it typically always does when you jailbreak your device

Congratulations on successfully done jailbreak iOS 9.3.3 on your iDevice. So start playing  all your favorites with new Cydia 9.3.3.  And wait for more updates from Pangu 9.3.3.

Tags : Cydia 9.3.3, jailbreak iOS 9.2 to iOS 9.3.3, Jailbreak iOS 9.3.3, Pangu 9.3.3, pangu jailbreak